Peristaltic pump tube Silicone Tube Tygon tube saint-gobain Norprene-Chemical

Saint-gobain tubing Its bore decides the flow rate Its wall thickness controls pumping efficiency.

Product Introduction

The best way to select a tube is to first decide which materials are chemically suitable, and then choose the one which best meets the physical demands of the application.For maximum tube life, use a large bore tube at low speed. For maximum flow rate use the largest tube at maximum speed. For maximum accuracy, use a small bore tube at maximum speed.Suction lift depends on the tube restituting fully before the advance of the next roller. If it does not, the flow rate will be reduced. For maximum suction lift or pressure, use the smallest practicable bore size of tubing and run the pump at the slowest possible speed.

Package:15m/Package

 Ordering guide

 •Microbore Tubing

Tubing sizes	0.5×0.8	1×1	2×1	2.4×0.8	4.8×1
Wall thickness (mm)	0.8	1	1	0.8	1
Inner diameter (mm)	0.5	1	2	2.4	4.8

 •Basic Tubing

Tubing sizes	13#	14#	19#	16#	25#	17#		18#	15#	24#	35#	36#
Wall thickness (mm)	1.6						2.5
Inner diameter (mm)	0.8	1.6	2.4	3.1	4.8	6.4		7.9	4.8	6.4	7.9	9.6

 •Industrial Tubing

Tubing sizes	73#	82#	86#	90#	88#	92#
Wall thickness (mm)	3.5		6.3		4.8
Inner diameter (mm)	9.6	13	9.5	19	12.7	25.4

Peristaltic pump tube Silicone Tube Tygon tube saint-gobain Norprene-Chemical